Manufacturer of Nylon 6 - Nylon 6 Unfilled Natural, Nylon 6 Glass Fibre /Beads Filled Natural, Nylon 6 Mineral Filled Natural, Black & Colors and Nylon 6 Heat Stabilized Grades offered by Next Polymers Limited, Mumbai, Maharashtra. 15% Glass-Filled Nylon 6 (Dry), Capron GR15 is a 15% glass reinforced polyamide 6 injection molding compound possessing a balance of engineering properties combined with excellent processability and surface aesthetics. Density is calculated by dividing the mass of the material by the volume and is normally expressed in g/cm3. It also has slightly higher strength than the other three materials. Glass filled nylon built using the SLS or LS process produce excellent tab strength, gears, impellers and work well in underhood automotive environments. TECAMID 66/X GF50 black is a PA66 GF50 50% glass fibre filled material based on a partially crystalline polyamide with partial aromatic components for improved thermal stability. Lighter than comparable glass-filled nylon materials. Density is calculated by dividing the mass of the material by the volume and is normally expressed in g/cm3. Specific Gravity (SG) is defined as the ratio of density of the material to the density of water (1 g/cm3) at a specified temperature. Tensile Strength 90 - 185 N/mm² Notched Impact Strength 5.0 - 13 Kj/m² Thermal Coefficient of expansion 90 - 20/70 x 10-6 Max Cont Use Temp 150 - 185 oC Density 1.13 - 1.35/1.41 g/cm3. It is also available in heat RESISTANCE TO CHEMICALS Specific properties Density: 1.15 g/cm3 (unfilled PA6 1.14) Mechanical properties: Very high Young's Modulus (ca. I … Nylon GF is a rigid glass-filled nylon 12 material used for real-world testing and functional end-use parts. Specific Gravity (SG) is defined as the ratio of density of the material to the density of water (1 g/cm3) at a specified temperature. Glass-filled Nylon (PA GF) – compared to pure nylon, PA GF demonstrates better stiffness and higher heat resistance but is less flexible and has a natural (off-white) color. NYLON GLASS FIBER is a high quality filament in reinforced polyamide with glass fibers, which is odourless during the extrusion process. Shaye Storm … Yes! Zytel® combines outstanding heat resistance with chemical- … ). Density: 1,18 g/cm3; Shore Hardness : 77 MPa; What Is Nylon Glass Fiber ? It also has slightly higher strength than the other three materials. Ideal for objects which require optimal resistance to shocks and high temperatures. 30% glass filled nylon type 6/6 is a glass reinforced extruded nylon 6/6. They are abrasive filaments that can damage soft metal nozzles, such as brass and copper, so use them with hardened steel nozzles. Density measures the mass per unit volume.It is calculated by dividing the mass of the material by the volume and is normally expressed in g/cm 3. PHYSICAL PROPERTIES. 2.9 GPa). Density is calculated by dividing the mass of the material by the volume and is normally expressed in g/cm3. Request Callback. The glass reinforcement gives the material higher compressive strength and rigidity, as well as improved frictional characteristics. Specific Gravity (SG) is defined as the ratio of density of the material to the density of water (1 g/cm3) at a specified temperature. Temperature resistance °C: 176 Density g/cm3: 1.10 Impact strength (notched) J/m: 37 Tensile strength MPa: 58 Tensile modulus MPa: 4,240 Minimum features: 0.8mm Smallest hole: 1.5mm Minimum clearance: surface and a much lower density that glass- and talc filled compounds. 4.6 GPa, unfilled PA6 ca. Glass filled polyamide (nylon) material for real-world physical testing and functional use DuraForm GF plastic for rugged thermoplastic testing Applications ... Density ASTM D792 1.49 g/cm3 1.49 g/cm3 Moisture Absorption-24 hours ASTM D570 0.22% 0.22% DuraForm® GF Plastic Zytel® 3D filament with 30% glass fiber reinforced nylon, black, based on DuPont ultra low shrinkage polymer technology. Nylon Glass Fiber is a high quality filament in reinforced polyamide with glass fibers.